I upgraded to Paasche DA400 to stamp compressor recently. It had always expected. The alleged hit 10 - 50 psi with Eclipse Iwata fully activated. More than 50 psi setting, constant pressure drops to 50 psi, the pressure is standard. The DA400 is not possible, but higher than the city airbrush MA-1000 (Silent Aire The Scorpion clone). Since no air tank, compressor airbrushing run continuously, and even at 20 psi. The engine stopped when it good activation has been suspended. I have not DA400 warmer than tap yet, but I read that runs hot once-a-half hour or more continueously.
I would like to add an air tank for the DA400, in fact turn it into Sparmax TC-5000 (or AC-500).
The issue is the right size for the idea DA400, I did a search on "air tank" in this forum and set up more than 40 pages or more than 1000. Sparmax airbrush and filing both with a 2.3-litre tank. Abd tank is available separately. For roughly the same price, I have the opportunity, many airhorn type of storage tank, for example, VIAIR 1 gallon tank with 4-1/4 "KMW_Performance ports or 3 gallons.
After reading through most of the articles in the archive, I have only one conclusion: There is no easy answer. (Thank you to all be destroyed.) My compressor is relatively small (1 / 6 HP). Not all days AB and especially short sessions. Please give me space, and because the size of the tank.
Yes, I know that the idea will not have to do my best. Yes, it would be cheaper if I just Abd TC-20T for $ 179. Yes, the idea can not reduce the debt of compressors to prolong life. This weekend of work, which I like to do, and this is the only reason to do so.
The second element, I might add, is a pressure regulator digital Habor shipping. It seems easy to have fun with the bench.
Tidak ada komentar:
Posting Komentar